1 3

Autel EVO II 110V Charger for Battery and Controller

Autel EVO II 110V Charger for Battery and Controller

$78.00
$78.00
Sale Sold out
Shipping calculated at checkout.

S-AR-E2-CHG

SKU S-AR-E2-CHG MPN EVO2-AC-CHARGER
  • Charges the aircraft battery and remote controller simultaneously
  • Delivers 66 watts of intelligent quick charge output power
  • USB-A port supports QC 3.0 for fast controller charging
  • Doubles as an external power source for compatible devices
  • Accepts a wide 100 to 240 volt AC input range
  • Charges a full aircraft battery in about ninety minutes
Request Info / Quote ☎︎ 1 (213) 262-9436
View full details
  • Description
  • Specifications
  • In the Box
  • FAQ

Autel EVO II 110V Charger for Battery and Controller: 66W Output With Simultaneous Charging

The Autel EVO II 110V Charger for Battery and Controller is an AC wall charger built to power an EVO II Series aircraft battery and remote controller at the same time from a standard outlet. A dedicated charging interface handles the aircraft battery while a QC 3.0 USB-A port charges the controller, delivering 66W of combined output power.

Field teams prepping for a flight day benefit from charging both pieces of equipment in a single session rather than running separate chargers. The USB port also doubles as an external power source for other QC-compatible devices, adding flexibility beyond the drone kit itself. A full aircraft battery charge takes about 90 minutes, with the remote controller reaching full charge in roughly 120 minutes from shutdown.

Key Features and Benefits

  • Dual charging: powers the aircraft battery and controller together
  • 66W output: delivers intelligent quick charge across both interfaces
  • USB-A port: supports QC 3.0 for fast controller charging
  • External power source: charges other QC-compatible devices when needed
  • Wide input range: accepts 100 to 240V AC power reliably

This charger exists to streamline pre-flight prep by combining battery and controller charging into one device and one outlet. Its wide input range also makes it usable across different power environments without a separate adapter.

DSLRPros stocks the charging accessories that keep EVO II field kits ready between missions, not just the aircraft itself. Our technicians can confirm compatibility with your specific EVO II setup before you check out. Order the EVO II 110V Charger for Battery and Controller from DSLRPros today.

  • Input: 100–240 V AC, 50/60 Hz, 1.5 A
  • Aircraft battery output: 13.2 V, 5 A
  • USB output: 5 V / 3 A, 9 V / 2 A, 12 V / 1.5 A
  • Battery charging time: Approximately 90 minutes (may vary depending on battery level and ambient charging temperature)
  • Remote controller charging time: Approximately 120 minutes (powered off)
  • 1x Autel EVO II 110V Charger for Battery and Controller
Can this charger power the battery and controller at the same time?

Yes, the charger is equipped with a dedicated charging interface for the aircraft battery and a separate USB-A interface for the remote controller, allowing both to charge simultaneously. The aircraft battery charges in about 90 minutes, while the controller takes approximately 120 minutes from a shutdown state. This lets operators prep an entire flight kit from a single outlet.

Can I use this charger to power other devices?

Yes, the USB-A interface supports QC 3.0 fast charging and can serve as an external power source for other compatible devices beyond the EVO II battery and controller. This adds some flexibility for charging phones or other QC-compatible accessories in the field.

Will this charger work with international power outlets?

Yes, the charger accepts a wide input range of 100 to 240V AC at 50/60Hz, making it usable across different regional power standards. Confirm your specific EVO II model with DSLRPros before ordering to ensure full compatibility with your battery and controller.