Gold Star Matrice 200 Series Maintenance Service

SKU
V-NB-GSM-M200
$999.00
  • Full Service Maintenance and Inspection For Matrice 200 Series and Series V2
  • Preventative Care To Protect Your Investment
  • Replacement of Critical Parts Including Propellers, Landing Gear, and More
  • Fast Turn Around Times Get You Back In The Air Fast!
In stock & ready to ship
OR

Give Us A Call

Kevin Hale - Drone Expert

(213) 262-9436


Just like your automobile needs routine maintenance to function correctly, your drone also requires care and inspection. DJI recommends regular maintenance for all drones with more than 50 flight hours. Professional maintenance services for the Matrice 200 Series V2 are now available through Dronefly's trained technicians and drone specialists.

Powerful drone systems comprise the DJI Matrice 200 Series. IMUs, compasses, and motors are small but complex systems that combine to provide speed, accuracy, and high payload capacity. Maintenance is necessary to ensure that these systems function properly. The Gold Star Maintenance plan entitles your Matrice 200, 210, or 210 RTK to be inspected, calibrated, cleaned, and to have their parts replaced.

New parts are included in the Gold Star Maintenance Plan, including propellers, propeller mounting plates, landing gear, landing gear mounting brackets, weatherproofing the top shell plugs, and weatherproofing the battery contact covers.

FPV camera calibration, compass and IMU calibration, frame inspection, and motor inspection and cleaning are among the maintenance and inspection procedures. Before shipping your craft back to you, our experts will take it for a full flight and picture test.

You can protect your investment and know that your craft is functioning at its peak with the Gold Star Maintenance Plan.

*Turn Around Time Subject To Change.

Click here to contact our crew at Dronefly to arrange your repair/maintenance service.



  • Service performed by: Experienced Drone Technicians
  • Replacement parts (if used): All brand-new OEM DJI factory parts

  • FPV Camera Calibration
  • Compass Calibration
  • Vision Sensor Calibration
  • Stress Crack Inspection
  • Central Frame Inspection and Maintenance
  • Aircraft Firmware Update
  • Aircraft Full Cleaning
  • Central Component IMU Inspection and Calibration
  • Motor Inspection and Cleaning
  • Electronic Speed Controller Inspection
  • Remote Control Firmware Update
  • Humidity and Water Seal Inspection
  • RTK and Ground Station Inspection and Test(As Required)
  • Battery Update & Test
  • Full Flight Test
  • Camera Video and Picture Test
  • 2x (Pairs) DJI Matrice 200 - 1760S Quick-Release Propellers (Part No.4)
  • 4x DJI Matrice 200 - Propeller Mounting Plate (Part No.5)
  • 2x DJI Matrice 200 Series - Landing Gear Mounting Bracket (Part No.15)
  • 2x DJI Matrice 200 V2 Series - Landing Gear
  • 1x DJI Matrice 210 - Weatherproofing Top Shell Plug (Part No.17)
  • 2x DJI Matrice 200 - Weatherproofing Battery Contact Cover (Part No.19)