DJI Ronin 2 3-Axis Handheld / Aerial Stabilizer

SKU
S-DJI-RONIN-2-STABILIZER
Vendor Part Number
CP.ZM.00000008.01
$8,399.00
  • Most versatile professional 3-axis stabilization system
  • Monocoque carbon fiber frame design
  • High torque motors supporting cameras up to 30 lbs
  • Fine tune balancing for precision control
  • Self-heating hot-swappable batteries
  • On-board power for camera and accessories
  • Integrated camera controls
  • Built-in GPS & compatible with DJI A3 Flight Controller
In stock & ready to ship
OR

Give Us A Call

Kevin Hale - Drone Expert

(213) 262-9436

This DJI Ronin 2 is a brand-new and sealed item! As a DJI Authorized Dealer, we carry branded drone parts that are genuine DJI. Don't risk the safety of your drone with imitation DJI parts. It is our mission to help you get the best quality products at the right price.

Let us know if you are looking for a DJI part that is not listed on our site and we will do our best to source it for you. Local pickup is available at 19850 Nordhoff Pl, Chatsworth, CA 91311. Contact us first to confirm availability.

Feel free to contact us with any questions. Our friendly and knowledgeable Solution Consultants are standing by to help make sure you get the great service you deserve















General

Built-In Functions 

Operation Modes
-Underslung Mode
-Upright Mode
-Briefcase Mode
-Handheld, Car Mount, Aerial & Tripod Mode

Axis Modes

-3-axis

-Pan-Lock

-Roll-360 (enabled through firmware update)
Built-in, independent IMU module
DJI Advanced 32-Bit ARM Processor
DJI Specialized Gimbal Drive Motors with Encoders
Dual Battery System
Bluetooth Module
D-Bus Receiver Supported
2.4 GHz/5.8 GHz Receiver
Temperature Sensors
Built-in Touch Panel
Built-in GPS
USB Type-C Connection
Power and Video Signal through Slip Ring



Mechanical & Electrical Characteristics

Working CurrentStatic current: 300 mA (@22.8 V)
Dynamic current: 500 mA (@22.8 V)
Locked motor current: Max 15 A (@22.8 V)
Run Time8 hours
2.5 hours (when powering gimbal, camera and accessories at the same time)
Operating Temperature-4°F ~ 122°F (-20°C ~ 50°C)
WeightIncluding handle bar: 14 lb (6.4 kg)
Excluding handle bar: 11 lb (5.0 kg)
Gimbal DimensionsExcluding handle bar: 350 mm (W) x 416 mm (D) x 530 mm (H)
Including handle bar: 630 mm (W) x 416 mm (D) x 720 mm (H)


Peripheral


Camera Tray DimensionsMaximum depth from the center of gravity on camera base plate: 245 mm
Maximum height measured from top of the camera base plate: 165 mm
Maximum width: 180 mm
Accessory Power Connections14.4 V x 4 Camera Cage (Combined 8 A), 14.4 V x 2 Pan Motor (Combined 4 A), 14 V x2 P-Tap (8 A)
GCU Input PowerIntelligent Battery: 4280 mAh-22.8 V
Connections2.4 GHz/5.8 GHz Remote Control, Bluetooth 4.0, USB Type-C
PC Assistant Software RequirementsWindows 7 or above; Mac OS X 10.11 or above
Mobile Assistant Software RequirementsiOS 9 or above; Android 4.4 or above


Working Performance

Load Weight (Reference Value)30 lbs (13.6 kg)
Angular Vibration Range± 0.02°
Maximum Controlled Rotation SpeedPan axis: 360°/s
Tilt axis: 360°/s
Roll axis: 360°/s
Mechanical Endpoint RangePan axis control: 360° continuous rotation
Tilt axis control: ±135°
Roll axis control: ±220°
Controlled Rotation RangePan axis control: 360° continuous rotation
Tilt axis control: ±135°
Roll axis control: ±30°
Load Weight (Reference Value)30 lbs (13.6 kg)
Angular Vibration Range± 0.02°
Maximum Controlled Rotation SpeedPan axis: 360°/s
Tilt axis: 360°/s
Roll axis: 360°/s
Mechanical Endpoint RangePan axis control: 360° continuous rotation
Tilt axis control: ±135°
Roll axis control: ±220°
Controlled Rotation RangePan axis control: 360° continuous rotation
Tilt axis control: ±135°
Roll axis control: ±30°

  • 1x Ronin 2 Gimbal
  • 1x Grip
  • 1x Dual TB50 Battery Mount
  • 1x Camera Top Cross Bar
  • 1x Camera Base Plate
  • 1x USB Type-C Data Cable
  • 1x Hex Tool
  • 5x Camera Screw 3/8"-16
  • 5x Camera Screw 1/4"-20
  • 8x Screws M4-10
  • 4x Screws 1/4