DJI Zenmuse L2 LiDAR Camera with Care Enterprise Plus

Vendor Part Number
CP.EN.00000505.01
$13,560.00
  • 4-cm vertical accuracy
  • 5-cm horizontal accuracy
  • Collects data from a 2.5km² area in 1 flight
  • 250m/450m Detection range
  • 5 Returns
  • Turnkey solution
  • Point Cloud LiveView
  • One-click processing on DJI Terra
  • Includes DJI Care Enterprise Plus with a coverage limit equivalent to product's value & an unlimited number of FREE repairs offered within 1 year after product is activated

In stock

Request a quote for

DJI Zenmuse L2 LiDAR Camera with Care Enterprise Plus

Need a Proposal or Have a Question? Please fill out the form below
and one of our aerial experts will be in touch immediately.

OR
OR

Give Us A Call

Talk to our drone experts

(213) 262-9436
Customize DJI Zenmuse L2 LiDAR Camera with Care Enterprise Plus
DJI Zenmuse L2   + $11,300.00
DJI Care Enterprise Plus for DJI Zenmuse L2   + $2,260.00

* Required Fields

Summary
    Total
    DJI Zenmuse L2 LiDAR Camera with Care Enterprise Plus
    DJI Zenmuse L2 LiDAR Camera with Care Enterprise Plus

    In stock

    $13,560.00

    DJI Zenmuse L2 for a new era of 3D data acquisition

    DJI Zenmuse L2 Lidar Camera Enterprise Care PlusDJI Zenmuse L2 Lidar Camera Enterprise Care Plus

     

    The DJI Zenmuse L2 is an advanced LiDAR system, building upon the success of its predecessor, the Zenmuse L1. It offers improved features, including an enhanced RGB camera, upgraded LiDAR module, and enhanced accuracy, making it a valuable tool for professionals.


    Increased hardware power and efficiency

    The Zenmuse L2 leverages aerial LiDAR technology to provide efficient and precise 3D data acquisition for professionals in various fields, such as land surveying, mapping, electricity inspection, forestry, and infrastructure management.

    It significantly reduces workload and field measurement time while improving detection efficiency.


    Perfect for DJI Matrice 300/350 RTK

    The Zenmuse L2 incorporates a high-accuracy IMU system and integrates seamlessly with DJI Matrice 300 RTK and Matrice 350 RTK drones.

    This combination delivers accurate and efficient data collection while enhancing in-the-field experiences with immediate readiness and high precision.


    Improved detection range and safety

    With a 30% increase in detection range compared to its predecessor, the Zenmuse L2 enhances operational safety and efficiency. It detects objects from greater distances, has a reduced spot size for more detailed data, and supports multiple return modes for enhanced data acquisition.


    Enhanced imaging and reduced operational costs

    The Zenmuse L2 features an upgraded RGB mapping camera with improved imaging and colorized point cloud details.

    It offers reduced photo intervals, extended shutter life, and the ability to capture photos and videos, even when point cloud data isn't necessary.


    Software for control and data processing

    DJI Pilot 2 software offers various display modes and real-time monitoring options, enhancing control during operation. It provides access to distance information and supports real-time point cloud coloring.

    Additionally, it can generate route operation quality reports and offers point cloud processing.


    One tool, multiple use cases

    The Zenmuse L2, in combination with DJI Matrice 300 RTK or Matrice 350 RTK drones and DJI Terra software, is suitable for various industries. It excels in applications such as topographic mapping, forestry, and electricity inspection, offering efficient data collection and analysis for diverse scenarios.


    More protection with DJI Care Enterprise

    This DJI Zenmuse L2 LiDAR Camera with Care Enterprise Plus package comes with 1-year coverage of DJI Care Enterprise Plus Plan.

    The plan includes water damage coverage, unlimited free repair services within the coverage amount, unlimited sharing coverage for your whole fleet, and free two-way shipping.


    In summary, the DJI Zenmuse L2 represents a significant advancement in LiDAR technology, building on the success of its predecessor, the Zenmuse L1. Its enhanced features, including an upgraded RGB camera, improved LiDAR module, and higher accuracy, make it an invaluable tool for professionals across multiple industries.

     

    DJI Zenmuse L2 product video

    General

    • Product Name

      Zenmuse L2
    • Dimensions

      155×128×176 mm (L×W×H)
    • Weight

      905±5 g
    • Power

      28 W (typical)
      58 W (max.)
    • IP Rating

      IP54
    • Supported Aircraft

      Matrice 300 RTK (requires DJI RC Plus)
      Matrice 350 RTK
    • Storage Temperature

      -20° to 60° C (-4° to 140° F)

    System Performance

    • Detection Range

      450m @50% reflectivity, 0 klx
      250m @10% reflectivity, 100 klx

      Typical data. Measured using a flat subject with a size larger than the laser beam diameter, perpendicular angle of incidence, and an atmospheric visibility of 23 km. In low-light environments, the laser beams can achieve the optimal detection range. If a laser beam hits more than one subject, the total laser transmitter power is split, and the achievable range is reduced. The maximum detection range is 500 m.
    • Point Cloud Rate

      Single return: max. 240,000 pts/s
      Multiple returns: max. 1,200,000 pts/s
    • System Accuracy

      Horizontal: 5 cm @ 150 m
      Vertical: 4 cm @ 150 m

      Measured under the following conditions in a DJI laboratory environment: Zenmuse L2 mounted on a Matrice 350 RTK and powered up. Using DJI Pilot 2’s Area Route to plan the flight route (with Calibrate IMU enabled). Using repetitive scanning with the RTK in the FIX status. The relative altitude was set to 150 m, flight speed to 15 m/s, gimbal pitch to -90°, and each straight segment of the flight route was less than 1500 m. The field contained objects with obvious angular features, and used exposed hard ground check points that conformed to the diffuse reflection model. DJI Terra was used for post-processing with Optimize Point Cloud Accuracy enabled. Under the same conditions with Optimize Point Cloud Accuracy not enabled, the vertical accuracy is 4 cm and the horizontal accuracy is 8 cm.
    • Real-Time Point Cloud Coloring Coding

      Reflectivity, Height, Distance, RGB

    LiDAR

    • Ranging Accuracy (RMS 1σ)

      2 cm @ 150 m

      Measured in an environment of 25° C (77° F) with a subject of 80% reflectivity at a distance of 150 m. The actual environment may differ from the testing environment. The figure listed is for reference only.
    • Maximum Returns Supported

      5
    • Scanning Modes

      Non-repetitive scanning pattern, Repetitive scanning pattern
    • FOV

      Repetitive scanning pattern: Horizontal 70°, Vertical 3°
      Non-repetitive scanning pattern: Horizontal 70°, Vertical 75°
    • Minimum Detection Range

      3 m
    • Laser Beam Divergence

      Horizontal 0.2 mrad, Vertical 0.6 mrad

      Measured at full width at half maximum (FWHM) conditions. 0.6 mrad signifies that for every 100m increase in distance, the diameter of the laser beam expands by 6 cm.
    • Laser Wavelength

      905 nm
    • Laser Spot Size

      Horizontal 4 cm, vertical 12 cm @ 100 m (FWHM)
    • Laser Pulse Emission Frequency

      240 kHz
    • Laser Safety

      Class 1 (IEC 60825-1:2014)
    • Accessible Emission Limit (AEL)

      233.59 nJ
    • Reference Aperture

      Effective Aperture: 23.85 mm (equivalent to circular)
    • Max Laser Pulse Emission Power Within 5 Nanoseconds

      46.718 W

    Inertial Navigation System

    • IMU Update Frequency

      200 Hz
    • Accelerometer Range

      ±6 g
    • Angular Velocity Meter Range

      ±300 dps
    • Yaw Accuracy (RMS 1σ)

      Real-time: 0.2°, Post-processing: 0.05°

      Measured under the following conditions in a DJI laboratory environment: Zenmuse L2 mounted on a Matrice 350 RTK and powered up. Using DJI Pilot 2’s Area Route to plan the flight route (with Calibrate IMU enabled). RTK in the FIX status. The relative altitude was set to 150 m, flight speed to 15 m/s, gimbal pitch to -90°, and each straight segment of the flight route was less than 1500 m.
    • Pitch/Roll Accuracy (RMS 1σ)

    • Real-time: 0.05°, Post-processing: 0.025°

      Measured under the following conditions in a DJI laboratory environment: Zenmuse L2 mounted on a Matrice 350 RTK and powered up. Using DJI Pilot 2’s Area Route to plan the flight route (with Calibrate IMU enabled). RTK in the FIX status. The relative altitude was set to 150 m, flight speed to 15 m/s, gimbal pitch to -90°, and each straight segment of the flight route was less than 1500 m.
    • Horizontal Positioning Accuracy

      RTK FIX: 1 cm + 1 ppm
    • Vertical Positioning Accuracy

      RTK FIX: 1.5 cm + 1 ppm

    RGB Mapping Camera

    • Sensor

      4/3 CMOS, Effective Pixels: 20 MP
    • Lens

      FOV: 84°
      Format Equivalent: 24 mm
      Aperture: f/2.8-f/11
      Focus Points: 1 m to ∞ (with autofocus)
    • Shutter Speed

      Mechanical Shutter: 2-1/2000 s
      Electronic Shutter: 2-1/8000 s
    • Shutter Count

      200000
    • Photo Size

      5280×3956 (4:3)
    • Still Photography Modes

      Single shot: 20 MP
      Timed: 20 MP
      JPEG Timed Interval: 0.7/1/2/3/5/7/10/15/20/30/60 s
      RAW/JPEG + RAW Timed Interval: 2/3/5/7/10/15/20/30/60 s
    • Video Codec and Resolution

      H.264
      4K: 3840×2160@30fps
      FHD: 1920×1080 @30fps
    • ISO

      Video: 100-6400
      Photo: 100-6400
    • Video Bitrate

      4K: 85Mbps
      FHD: 30 Mbps
    • Supported File System

      exFAT
    • Photo Format

      JPEG/DNG (RAW)
    • Video Format

      MP4 (MPEG-4 AVC/H.264)

    Gimbal

    • Stabilization System

      3-axis (tilt, roll, pan)
    • Angular Vibration Range

      0.01°
    • Mounting

      Detachable DJI SKYPORT
    • Mechanical Range

      Tilt: -143° to +43°
      Pan: ±105°

      * Structural limit, not controllable range.
    • Controllable Range

      Tilt: -120° to +30°
      Pan: ±90°
    • Operation Mode

      Follow/Free/Re-center

    Data Storage

    • Raw Data Storage

      Photo/IMU/Point cloud/GNSS/Calibration files
    • Point Cloud Data Storage

      Real-time modeling data storage
    • Supported microSD Cards

      microSD: Sequential writing speed 50 MB/s or above and UHS-I Speed Grade 3 rating or above; Max capacity: 256 GB. Use the recommended microSD cards.
    • Recommended microSD Cards

      Lexar 1066x 64GB U3 A2 V30 microSDXC
      Lexar 1066x 128GB U3 A2 V30 microSDXC
      Kingston Canvas Go! Plus 128GB U3 A2 V30 microSDXC
      Lexar 1066x 256GB U3 A2 V30 microSDXC

    Post-Processing

    • Supported Software

      DJI Terra
    • Data Format

      DJI Terra supports exporting point cloud models in the following formats:
      PNTS/LAS/PLY/PCD/S3MB

    • 1x DJI Zenmuse L2
    • 1x MicroSD Card (128GB)
    • 1x Lens Cap
    • 1x Storage Case
    • 1x Lens Cleaning Cloth
    • DJI Care Enterprise Plus

    Top customer reviews

    No reviews

    Write Your Own Review
    Only registered users can write reviews. Please Sign in or create an account