DJI Matrice 300 OSDK Expansion Module (Part No.13)

Vendor Part Number
  • Compatible with the M300 RTK and Manifold 2
  • Converts interfaces on the M300 RTK OSDK to standard interfaces such as USB Type-A, UART serial port and XT30 power output, to allow for connection with onboard computing platforms
  • Can be used with the single upward gimbal to meet the needs of more scenarios
  • When mounted onto the M300 RTK, the module can be put into the safety transport case while attached to the drone, ensuring easier storage
In stock & ready to ship

Request a quote for

DJI Matrice 300 OSDK Expansion Module (Part No.13)

Need a Proposal or Have a Question? Please fill out the form below
and one of our aerial experts will be in touch immediately.

We would never share your information with third parties. Privacy Policy

Give Us A Call

Talk to our drone experts

(213) 262-9436

Allows connection of M300 RTK with Manifold 2, and offers adapter interfaces for onboard computing platforms.

This module converts the M300 RTK OSDK interfaces to standard interfaces such as USB Type-A, UART serial ports and XT30 power plugs, to allow connection with onboard computing platforms. The module is not designed with dust-proof or water-proof capabilities.

Please assemble according to the instructions in he User Manual before use.

This DJI Matrice 300 - OSDK Expansion Module (Part No.13) is a brand-new and sealed item! As a DJI Authorized Dealer, we carry branded drone parts that are genuine DJI. Don't risk the safety of your drone with imitation DJI parts. It is our mission to help you get the best quality products at the right price.

Let us know if you are looking for a DJI part that is not listed on our site and we will do our best to source it for you. Local pickup is available at 19850 Nordhoff Pl, Chatsworth, CA 91311. Contact us first to confirm availability.

Feel free to contact us with any questions. Our friendly and knowledgeable Solution Consultants are standing by to help make sure you get the great service you deserve

  • Compatible with Matrice 300 RTK & Manifold 2

  • 2x Bracket A (upper)
  • 1x Bracket B (left)
  • 1x Bracket C (right)
  • 3x Bracket D (reinforcing rib)
  • 4x Bracket connection block
  • 1x OSDK adapter plate module
  • 1x USB cable (with two type-A ports)
  • 1x XT30 power cable
  • 3x Wire clip
  • 3x Foot pad
  • 5x Hand screw
  • 15x Screw A (M1.6)
  • 5x Screw B (M2.0)
  • 5x Screw C (M3.0)
  • 3x Screw D (M1.6 step)
  • 1x Screwdriver kit

Top customer reviews

No reviews

Write Your Own Review
You're reviewing:DJI Matrice 300 OSDK Expansion Module (Part No.13)
Your Rating