{"product_id":"micasense-rededge-mx-multispectral-kit","title":"MicaSense RedEdge-MX Multispectral Kit","description":"\u003ch2\u003eMicaSense RedEdge-MX Multispectral Kit: Five-Band Crop Health Mapping\u003c\/h2\u003e\n\u003cp\u003eThe MicaSense RedEdge-MX Multispectral Kit captures five spectral bands in a single flight, giving growers, agronomists, and researchers a consistent way to measure crop health from the air. Separate blue, green, red, red edge, and near-infrared imagers each record 1280×960 pixels, and the data feeds orthomosaics, vegetation indices such as NDVI and NDRE, and reflectance maps. From 400 ft (120 m), ground sampling distance is 3.14 in (8 cm) per pixel per band. Global shutter imagers limit distortion from aircraft movement, and mapping a field in one flight keeps every band tied to the same conditions and flight line.\u003c\/p\u003e\n\u003cp\u003eThe kit pairs the sensor with a DLS 2 light sensor, which measures ambient light and sun angle for each band, and a CRP2 calibrated reflectance panel for reference captures before and after each flight. A CFexpress card with card reader, USB Wi-Fi dongle, integration cables, and mounting hardware are included. Captures are saved as TIFF files that work with Pix4D and Agisoft, and the DJI SkyPort kit for Matrice 300 and 350 aircraft is sold separately. Setup runs through a web-based configuration page over Wi-Fi, and the lens cover and hard case protect the sensor in transit.\u003c\/p\u003e\n\u003ch3\u003eKey Features and Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFive bands: Blue, green, red, red edge, and near-infrared per flight\u003c\/li\u003e\n\u003cli\u003eSharp maps: 3.14 in (8 cm) GSD at 400 ft altitude\u003c\/li\u003e\n\u003cli\u003eGlobal shutter: Imagers limit distortion from aircraft movement during capture\u003c\/li\u003e\n\u003cli\u003eLight correction: DLS 2 measures ambient light and sun angle\u003c\/li\u003e\n\u003cli\u003eReference panel: CRP2 supports calibration before and after each flight\u003c\/li\u003e\n\u003cli\u003eImager resolution: Each of five imagers records 1280×960 pixels per capture\u003c\/li\u003e\n\u003cli\u003eCapture rate: About one capture per second across all bands\u003c\/li\u003e\n\u003cli\u003eVegetation indices: Outputs support NDVI, NDRE, orthomosaics, and reflectance maps\u003c\/li\u003e\n\u003cli\u003eLight payload: Weighs 8.18 oz (231.9 g) with DLS 2\u003c\/li\u003e\n\u003cli\u003eWi-Fi setup: Web-based configuration page through included USB Wi-Fi dongle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCalibrated Data You Can Compare\u003c\/h3\u003e\n\u003cp\u003eCalibration is what separates a useful map from a pretty one. The DLS 2 records light conditions on every frame, and the CRP2 panel gives each flight a known reflectance target, so imagery from different days and fields can be compared on equal terms. Global shutter imagers work without a gimbal, which keeps the payload simple and light on the airframe. The kit arrives complete in one case, so a crew can move it between supported aircraft and keep the same sensor and routine across seasons, spreading the cost of the system over every repeat survey.\u003c\/p\u003e\n\u003ch3\u003eCompatibility and System Integration\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 RedEdge-MX sensor with 5 imagers and global shutter (included)\u003c\/li\u003e\n\u003cli\u003e1 DLS 2 incident light sensor with embedded GPS (included)\u003c\/li\u003e\n\u003cli\u003e1 CRP2 calibrated reflectance panel for pre-flight and post-flight captures (included)\u003c\/li\u003e\n\u003cli\u003e1 CFexpress card with reader and 1 USB Wi-Fi dongle (included)\u003c\/li\u003e\n\u003cli\u003e1 set integration cables, 1 set mounting hardware, 1 lens cover (included)\u003c\/li\u003e\n\u003cli\u003e1 hard carrying case for transport and 1 start guide (included)\u003c\/li\u003e\n\u003cli\u003eDJI SkyPort kit for Matrice 300 and 350 (sold separately)\u003c\/li\u003e\n\u003cli\u003ePix4D or Agisoft photogrammetry software for orthomosaic and index processing (sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications and Use Cases\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCrop scouting: flags plant stress at zone level across large fields\u003c\/li\u003e\n\u003cli\u003ePhenotyping: compares plant response across plots using calibrated reflectance data\u003c\/li\u003e\n\u003cli\u003eInput planning: guides fertilizer and irrigation decisions with NDRE maps\u003c\/li\u003e\n\u003cli\u003eCrop health diagnosis: detects disease, pest pressure, and nutrient deficiency patterns\u003c\/li\u003e\n\u003cli\u003eTrend analysis: tracks seasonal change with repeat flights over same fields\u003c\/li\u003e\n\u003cli\u003eLand restoration: monitors revegetation progress with repeatable multispectral survey data\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMultispectral surveys earn their value through repeatability: the same bands, the same calibration routine, and the same outputs on every flight. This kit packages those pieces together, so the first mission follows the same routine as the fiftieth.\u003c\/p\u003e\n\u003cp\u003eCrews that need calibrated multispectral data without sourcing parts piecemeal can get the full kit from DSLRPros, with the SkyPort kit and processing software available separately for their aircraft. Order the MicaSense RedEdge-MX Multispectral Kit from DSLRPros today.\u003c\/p\u003e","brand":"MicaSense","offers":[{"title":"Default Title","offer_id":68078077280486,"sku":"S-MICA-REMX","price":3600.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/2769\/8662\/files\/MicaSense-RedEdge-MX-Multispectral-Kit.webp?v=1795089045","url":"https:\/\/www.dslrpros.com\/products\/micasense-rededge-mx-multispectral-kit","provider":"DSLRpros","version":"1.0","type":"link"}