GoProfessional Cases Matrice 300 Case
- Water-jet precision cut with closed cell foam to resist water and dust infiltration
- In-line skate style wheels for easy transport
- Padlock holes include stainless steel padlock protector clips
- Waterproof and dust tight design (MIL-C-4150J)
- Trigger release latch system
- Ambient pressure equalization valve (MIL-STD-648C)
- Resistant to UV, solvents, corrosion, fungus (MIL-STD-810F)
- Resistant to impact damage (MIL-STD-810F)
Give Us A Call
Kevin Hale - Drone Expert(213) 262-9436
GPC has been watching this vehicle come to life for quite some time now and has tracked its challenging storage configuration, therefore designing unchallengeable protection in the smallest footprint. A small footprint doesn’t mean limited storage; this small case packs 4 flights worth of batteries, 2 controllers, 2 controller batteries, * 2 GPC LensPen MicroPro and * 2 GPC Micro SD Card Holder.
GPC took it to the next level with ridiculously simple customizable payload storage. The removable payload tray comes stock to fit the H20 or H20T, Z15 spotlight light, Z30 and FLIR XT2. If you don’t need the Z30 or XT2 or both, then they have designed it so you can just remove the perforated foam creating their cavities and you now have storage for either one of those or two individual accessory cavities or one large cavity. GPC has also packed 2 accessory cavities under the payload tray next to the lower batteries and adjacent to the spare props.
This doesn’t end the options! Knowing that your payloads are subject to change based on your missions from day to day, or if you don’t have any of the stock payloads, then customization of this specific tray is easy. There is plenty of room with 88 SQ IN to get creative.
- Exterior Length: 26.50 in
- Exterior Width: 26.54 in
- Exterior Depth: 15.65 in
- Interior Length: 24 in
- Interior Width: 24 in
- Interior Depth: 14 in
- Weight: 28 lb 0.00 oz
- Shipping Weight: 35 lb 0 oz
- 1x GPC Matrice 300 Case