DJI Dock 2 + Matrice 3TD with DJI Care Enterprise Plus

Vendor Part Number
B-DJI-DOCK2-M3TD-CP

DJI Dock 2: 

  • Compact design for easy transport and deployment
  • Precise and secure drone landings with a cradled platform
  • Rapid 32-minute charging for uninterrupted missions
  • IP55-rated: dustproof and waterproof
  • Third-party payloads for versatile missions, from photography to data collection
  • Works with new drone models Matrice 3TD and 3D

DJI Matrice 3TD:

  • 48MP wide-angle camera with 24mm 1/1.32-inch CMOS sensor
  • 12MP tele camera with 162mm 1/2-inch CMOS sensor
  • 44mm infrared camera with 28x digital zoom & 1280×1024@30fps
  • IP54-rated: dustproof and waterproof
  • 50-minute max flight time
  • 6-directional obstacle sensing system
  • 10-km effective operating radius
  • Integrated RTK module for ±3cm positioning accuracy
  • Comes with DJI Care Enterprise Plus

From $15,499.00

To $20,817.00

Request a quote for

DJI Dock 2 + Matrice 3TD with DJI Care Enterprise Plus

Need a Proposal or Have a Question? Please fill out the form below
and one of our aerial experts will be in touch immediately.

We would never share your information with third parties. Privacy Policy
OR
OR

Give Us A Call

Talk to our drone experts

(213) 262-9436

Cloud-based intelligence with DJI Dock 2 and Matrice 3TD combo

Experience advanced autonomous drone technology with the DJI Dock 2, seamlessly paired with the DJI Matrice 3TD thermal drone.

This revolutionary combination redefines the boundaries of unmanned aerial efficiency, offering an unparalleled level of operational autonomy that caters to the future of aerial surveillance, inspection, and mapping.

The DJI Dock 2, with its sleek design and state-of-the-art charging capabilities, ensures your DJI Matrice 3D is always ready for its next mission, minimizing downtime and maximizing productivity.

With advanced features and unmatched reliability, this duo is not just an investment in drone technology; it's a leap towards shaping the future of autonomous aerial solutions.


DJI Matrice 3TD drone taking off from the DJI Dock 2DJI Matrice 3TD drone taking off from the DJI Dock 2

 

Major updates from DJI Dock 1 to DJI Dock 2

  • Reduced size and weight: Dock 2 boasts a smaller footprint and lighter weight at just 34kg and covering only 0.34m^2, making it significantly easier to transport and deploy than its predecessor.
  • Enhanced performance: With a maximum flight time of 50 minutes and an operational range of 10 km, the device improves both coverage and efficiency over Dock 1.
  • Surveying capability: Integration of a 20MP surveying camera (identical to the M3E camera) with the M3D variant opens new avenues in construction site management, mining, and more, thanks to its high-precision surveying and mapping capabilities.
  • Cost-effectiveness: It is designed to be more affordable in terms of both hardware and deployment/maintenance services.

Compatible aircraft

DJI Dock 2 is compatible with two specific aircraft variants: the DJI Matrice 3 dock version (M3D) and the DJI Matrice 3 thermal dock version (M3TD), each equipped with distinct camera setups for specialized tasks.

The M3D is optimized for high-precision surveying and mapping, while the M3TD is suited for public safety operations and inspections.


Software and SDK/API support

It works seamlessly with the DJI FlightHub 2 platform and continues to support Cloud API for integration with third-party cloud platforms. The E-Port on M3D/M3TD aircraft allows for the mounting of third-party payloads, enhancing the system's flexibility and application potential.


Application scenarios

The 20MP wide camera on the M3D, similar to the M3E camera, enables high-precision surveying and mapping, making Dock 2 ideal for construction site progress monitoring, earthwork measurements, and disaster monitoring.

The M3TD's combination of thermal and RGB cameras allows for applications in security patrol, emergency response, and automated asset inspections.


Technical specifications and improvements

DJI Dock 2 features a significant reduction in size and weight compared to Dock 1, alongside improvements in operational efficiency and environmental adaptability.

With a max takeoff altitude of 2500m, an operational radius of 10km, and a charging time of 32 minutes for a battery from 20% to 90%, it is designed for robust performance.

Additionally, it supports smart oblique photography, enhancing its utility in detailed mapping and surveying tasks.


DJI Matrice 3TD

The DJI Matrice 3TD drone presents a combination of advanced imaging capabilities and smart functionalities tailored for a range of aerial applications.

Designed for precision and efficiency, this drone is suited for professionals in mapping, surveillance, and inspection operations seeking reliable aerial platforms even in challenging environments.

 

Wide-angle, tele, and thermal cameras of the DJI Matrice 3TDWide-angle, tele, and thermal cameras of the DJI Matrice 3TD

Visual and thermal imaging capabilities

The DJI Matrice 3TD is equipped with a trifecta of advanced cameras, each optimized to meet the demands of diverse aerial imaging tasks, especially when used with the DJI Dock 2.

  • Wide-angle camera

Featuring a 1/1.32-inch CMOS sensor and boasting an impressive 48MP effective pixel count, the wide-angle camera delivers stunning clarity and detail.

With a format equivalent to 24mm, it captures expansive scenes with precision, making it ideal for panoramic views and detailed landscape mapping.

  • Tele camera

The tele camera, equipped with a 1/2-inch CMOS sensor and offering a format equivalent to 162mm, excels in capturing distant subjects with remarkable clarity.

With 12MP effective pixels, it ensures sharp and detailed imagery, perfect for aerial inspection and surveillance tasks requiring enhanced zoom capabilities.

  • Infrared camera

The infrared camera of the M3TD provides valuable thermal imaging capabilities, offering a 40mm format equivalent and delivering resolutions of 640×512@30fps in normal mode and 1280×1024@30fps with the UHR Infrared Image function enabled.

With a 28x digital zoom, it enables precise detection and analysis of heat signatures, making it indispensable for security and inspection operations in various environments.

Together, these cameras empower the DJI Matrice 3TD to excel in a variety of aerial imaging applications, from high-precision mapping to detailed thermal inspection tasks.

Durability and precision

The DJI Matrice 3TD boasts an IP54 rating, indicating its capacity to resist dust and water, thereby ensuring consistent performance across diverse environments. This certification confirms the drone's ability to withstand challenging conditions, enhancing its longevity.

The inclusion of an RTK (Real-Time Kinematic) module improves the drone's location accuracy to within ±3cm. This level of precision is crucial for applications requiring detailed spatial information, such as mapping and inspection.

Efficiency and safety in operations

The drone's ability to fly for up to 50 minutes on a single charge significantly increases the length of missions while decreasing the frequency of landings and battery swaps.

Furthermore, its 10-km operational range facilitates extensive coverage and operations in areas that are otherwise hard to access.

Safety is bolstered by a 6-directional obstacle sensing system, which enables the drone to identify and navigate around potential hazards, reducing the likelihood of accidents.

These features establish the DJI Matrice 3TD as a reliable and safe option for professional uses across various sectors, expanding the capabilities of drone technology.


Next-level autonomous drone operations

The integration of the DJI Dock 2 with the DJI Matrice 3TD drone represents a monumental leap forward in autonomous drone technology. This pairing not only enhances operational efficiency but also redefines the boundaries of unmanned aerial surveillance, inspection, and data collection.

By enabling remote management and advanced autonomous capabilities, users across various sectors—from agriculture to emergency response—can now execute missions with unprecedented precision and reliability.

This innovative duo is set to pave the way for the future of autonomous drone operations, offering solutions that are not only more effective but also more accessible to a wide range of industries worldwide.

Introducing DJI Dock 2

Dock - General
Product Name DJI Dock 2
Total Weight 34 kg (without aircraft)

The actual product weight may vary due to differences in batch materials and external factors.
Dimensions Dock Cover Opened: 1228×583×412 mm (L×W×H)
Dock Cover Closed: 570×583×465 mm (L×W×H)

The above data does not include the height of the wind speed gauge (145 mm) but includes the height of the mounting base brackets (55 mm).
Input Voltage 100-240 V (AC), 50/60 Hz
Input Power Max 1000 W
Operating Temperature -25° to 45° C (-13° to 113° F)

When the ambient temperature is below -20° C (-4° F), the dock is in standby status, and the aircraft cannot perform flight tasks.
Ingress Protection Rating IP55
Number of Drones Accommodated 1
Max Allowable Landing Wind Speed 8 m/s
Max Operating Altitude 4000 m
Receiving Frequency of RTK Base Station Satellite Simultaneously receive:
GPS: L1 C/A, L2
BeiDou2: B1l, B2l, B3l
BeiDou3: B1l, B3l
GLONASS: L1, L2
Galileo: E1, E5B
Positioning Accuracy of RTK Base Station Horizontal: 1 cm + 1 ppm (RMS)
Vertical: 2 cm + 1 ppm (RMS)
Dock - Charging Performance
Output Voltage 28 V DC
Charging Time 32 minutes

The data was measured when charging the aircraft (when powered off) from 20% to 90% in a 25° C (77° F) environment.
Dock - Video Transmission
Video Transmission System O3 Enterprise
Operating Frequency 2.4000-2.4835 GHz
5.725-5.850 GHz
Antenna Built-in 4 antennas, 2T4R, supports intelligent switching
Transmitter Power (EIRP) 2.4 GHz: < 33 dBm (FCC); < 20 dBm (CE/SRRC/MIC)
5.8 GHz: < 33 dBm (FCC); < 14 dBm (CE); < 23 dBm (SRRC)
Dock - Air Conditioning System
Operating Voltage 28 V DC
Air Conditioning Type TEC Air Conditioning
Dock - Backup Battery
Battery Capacity 12 Ah
Output Voltage 12 V
Battery Type Lead-acid battery
Battery Life > 5 hours

Measured with a fully charged backup battery in a 25° C (77° F) environment. ‌After a power outage, the dock does not support functions like aircraft charging, air conditioning, dock cover heating, and wind speed gauge heating. Always check malfunctions promptly.
Dock- Network Access
Ethernet Access 10/100/1000Mbps adaptive Ethernet port
Dock - Sensor
Wind Speed Sensor Supported
Rainfall Sensor Supported
Ambient Temperature Sensor Supported
Water Immersion Sensor Supported
In-Cabin Temperature Sensor Supported
In-Cabin Humidity Sensor Supported
Dock - Security Camera (External)
Resolution 1920×1080
Field of View (FOV) 151°
Auxiliary Light Auxiliary White Light
Resolution 1920×1080
Field of View (FOV) 151°
Auxiliary Light Auxiliary White Light
Dock- Lightning Protection
AC Power Port
20 kA (rated value), meets EN 61643-11 Type 2 and IEC 61643-1 Class protection level requirements
Ethernet Port
10 kA (I<sub>total</sub>)meets EN/IEC 61643-21 Category C protection level requirements
Dock - Supported Software
Applications
DJI Pilot 2 (connects to DJI Dock 2 via DJI RC Pro Enterprise for deployment and commissioning)
Cloud Platform DJI FlightHub 2 (supported by default)
Third-party cloud platforms (accessed through DJI Cloud API)
Dock - Expansion Capability
Open Protocol DJI Cloud API
Edge Computing Supports data communication with external switches
Aircraft - General
Weight ‌1410 g

This value includes the weight of the battery, propellers, and a microSD card, but does not include third-party payloads. The actual product weight may vary due to differences in batch materials and external factors.
Max Takeoff Weight 1610 g
Dimensions 335×398×153 mm (L×W×H, without propellers)
Wheelbase Diagonal Wheelbase: 463.2 mm
Left-Right Wheelbase: 359.9 mm
Front-Rear Wheelbase: 291.4 mm
Max Ascent Speed 6 m/s (Normal Mode)
8 m/s (Sport Mode)
Max Descent Speed 6 m/s (Normal Mode)
6 m/s (Sport Mode)
Max Horizontal Speed (at sea level, no wind) Normal Mode, With Obstacle Sensing Enabled: 15 m/s flying forward, 12 m/s flying backward, 10 m/s flying sideways
Sport Mode: 21 m/s flying forward, 18 m/s flying backward, 16 m/s flying sideways
Max Wind Speed Resistance During Operation: 12 m/s
During Takeoff/Landing: 8 m/s
Max Takeoff Altitude 4000 m
Max Flight Time 50 minutes

Measured in a controlled test environment. Specific test conditions are as follows: flying forward at a constant speed of 46.8 kph in a windless laboratory environment at 20 meters above sea level, in photo mode (without photo-taking operation during flight), with Obstacle Avoidance Action set to Off, and from 100% battery level until 0%. Results may vary depending on the environment, actual use, and firmware version.
Max Hovering Time 40 minutes

Measured with the DJI Matrice 3D series drones hovering in a windless environment at 20 meters above sea level and from 100% battery level until 0%. Results may vary depending on the environment, actual use, and firmware version.
Max Operating Radius 10 km

Measured in an environment of approximately 25° C (77° F) with a safe battery level of 25%, ambient wind speed of approximately 4 m/s, round-trip flight speed of approximately 15 m/s, and hovering operation of 10 minutes. Results may vary depending on the environment, actual use, and firmware version.
Max Flight Distance ‌43 km

Measured with DJI Matrice 3D/3TD flying at a constant speed of 54 kph in a windless environment at 20 meters above sea level and from 100% battery level until 0%. Results may vary depending on the environment, actual use, and firmware version.
Max Pitch Angle 25° (Normal Mode)
25° (Sport Mode)
Max Angular Velocity 250°/s
Global Navigation Satellite System GPS + Galileo + BeiDou + GLONASS (GLONASS is supported only when the RTK module is enabled.)
Hovering Accuracy Range (windless or breezy) Vertical:
±0.1 m (with vision positioning)
±0.5 m (with GNSS positioning)
±0.1 m (with RTK positioning)

Horizontal:
±0.3 m (with vision positioning)
±0.5 m (with GNSS positioning)
±0.1 m (with RTK positioning)
Operating Temperature -20° to 45° C (-4° to 113° F)
Ingress Protection Rating IP54
Motor Model 2607
Propeller Model 1149, foldable, non-quick release
RTK Module Integrated on the aircraft
Beacon Integrated on the aircraft
Aircraft - Wide-Angle Camera
Image Sensor DJI Matrice 3D: 4/3 CMOS, Effective Pixels: 20 MP
DJI Matrice 3TD: 1/1.32-inch CMOS, Effective Pixels: 48 MP
Lens DJI Matrice 3D
FOV: 84°
Format Equivalent: 24 mm
Aperture: f/2.8-f/11
Focus: 1 m to ∞

DJI Matrice 3TD
FOV: 82°
Format Equivalent: 24 mm
Aperture: f/1.7
Focus: 1 m to ∞
Lens Defogging DJI Matrice 3D: The wide-angle camera supports lens defogging.
DJI Matrice 3TD: The wide-angle camera supports lens defogging.
ISO Range DJI Matrice 3D: 100-6400
DJI Matrice 3TD: 100-25600
Shutter Speed DJI Matrice 3D
Electronic Shutter: 8-1/8000 s
Mechanical Shutter: 8-1/2000 s

DJI Matrice 3TD
Electronic Shutter: 8-1/8000 s
Max Image Size DJI Matrice 3D: 5280×3956
DJI Matrice 3TD: 8064×6048
Still Photography Modes DJI Matrice 3D
Single: 20 MP
Timed: 20 MP, 0.7/1/2/3/5/7/10/15/20/30/60 s
Smart Low-light: 20 MP
Panorama: 20 MP (raw image); 100 MP (stitched image)

DJI Matrice 3TD
Single: 12 MP, 48 MP
Timed: 12 MP, 48 MP, 0.7/1/2/3/5/7/10/15/20/30/60 s*
Smart Low-light: 12 MP
Panorama: 12 MP (raw image); 100 MP (stitched image)

* The 0.7s and 1s intervals are not supported when taking 48MP timed photos.
Video Resolution H.264
4K: 3840×2160@30fps
FHD: 1920×1080@30fps
Video Bitrate DJI Matrice 3D
4K: 130 Mbps
FHD: 70 Mbps

DJI Matrice 3TD
4K: 85 Mbps
FHD: 30 Mbps
Supported File System exFAT
Photo Format JPEG
Video Format MP4 (MPEG-4 AVC/H.264)
Aircraft - Tele Camera
Image Sensor 1/2-inch CMOS, Effective Pixels: 12 MP
Lens FOV: 15°
Format Equivalent: 162 mm
Aperture: f/4.4
Focus: 3 m to ∞
Lens Defogging DJI Matrice 3D: The tele camera supports lens defogging.
DJI Matrice 3TD: The tele camera supports lens defogging.
ISO Range DJI Matrice 3D: 100-6400
DJI Matrice 3TD: 100-25600
Shutter Speed Electronic Shutter: 8-1/8000 s
Max Image Size 4000×3000
Photo Format JPEG
Video Format MP4 (MPEG-4 AVC/H.264)
Still Photography Modes DJI Matrice 3D
Single: 12 MP
Timed: 12 MP, 0.7/1/2/3/5/7/10/15/20/30/60 s
Smart Low-light: 12 MP

DJI Matrice 3TD
Single: 12 MP
Timed: 12 MP, 0.7/1/2/3/5/7/10/15/20/30/60 s
Smart Low-light: 12 MP
Video Resolution H.264
4K: 3840×2160@30fps
FHD: 1920×1080@30fps
Video Bitrate DJI Matrice 3D
4K: 130 Mbps
FHD: 70 Mbps

DJI Matrice 3TD
4K: 85 Mbps
FHD: 30 Mbps
Digital Zoom 8x (56x hybrid zoom)
Aircraft - Infrared Camera (DJI Matrice 3TD)
Thermal Imager Uncooled VOx Microbolometer
Pixel Pitch 12 μm
Frame Rate 30 Hz
Lens FOV: 61°
Format Equivalent: 40 mm
Aperture: f/1.0
Focus: 5 m to ∞

‌Do not expose the infrared camera lens to strong sources of energy, such as the sun, lava, or a laser beam. Otherwise, the camera sensor may be burned, leading to permanent damage.
Sensitivity ≤ 50 mk@F1.0
Temperature Measurement Method Spot Measurement, Area Measurement
Temperature Measurement Range -20° to 150° C (-4° to 302° F, High Gain Mode)
0° to 500° C (32° to 932° F, Low Gain Mode)
Palette
White Hot/Black Hot/Tint/Iron Red/Hot Iron/Arctic/Medical/Fulgurite/Rainbow 1/Rainbow 2
Photo Format JPEG (8-bit)
R-JPEG (16-bit)
Video Resolution Normal Mode: 640×512@30fps
UHR Infrared Image Mode: 1280×1024@30fps (With the UHR Infrared Image function enabled, the aircraft can automatically enable or disable UHR Infrared Image mode according to the ambient light brightness.)
Video Bitrate 6 Mbps
Video Format MP4 (MPEG-4 AVC/H.264)
Still Photography Modes Single
Normal Mode: 640×512
UHR Infrared Image Mode: 1280×1024

Timed
Normal Mode: 640×512, 0.7/1/2/3/5/7/10/15/20/30/60 s
UHR Infrared Image Mode: 1280×1024, 0.7/1/2/3/5/7/10/15/20/30/60 s
Digital Zoom 28x
Infrared Wavelength 8-14 μm
Infrared Temperature Measurement Accuracy ±2° C or ±2% (using the larger value)
Aircraft - Gimbal
Stabilization 3-axis mechanical gimbal (tilt, roll, pan)
Mechanical Range Tilt: -135° to +45°
Roll: -45° to +45°
Pan: -27° to +27°
Controllable Range Tilt: -90° to +35°
Pan: Not controllable
Max Control Speed (tilt) 100°/s
Angular Vibration Range ±0.005°
Aircraft - Sensing
Sensing Type ‌The aircraft supports six-directional obstacle sensing.
‌The aircraft has a 10° blind spot in the upper rear area. Always fly with caution.
Forward Measurement Range: 0.5-21 m
Detection Range: 0.5-200 m
Effective Sensing Speed: Flight Speed ≤ 15 m/s
FOV: Horizontal 90°, Vertical 90°
Backward Measurement Range: 0.5-23 m
Effective Sensing Speed: Flight Speed ≤ 12 m/s
FOV: Horizontal 90°, Vertical 90°
Lateral Measurement Range: 0.5-15 m
Effective Sensing Speed: Flight Speed ≤ 10 m/s
FOV: Horizontal 104°, Vertical 90°
Upward Measurement Range: 0.5-21 m
Effective Sensing Speed: Flight Speed ≤ 6 m/s
FOV: Front and Back 90°, Left and Right 90°
Downward Measurement Range: 0.5-14 m
Effective Sensing Speed: Flight Speed ≤ 6 m/s
FOV: Front and Back 95°, Left and Right 110°
Operating Environment Forward, Backward, Left, Right, and Upward: Surfaces with discernible patterns and adequate lighting (lux > 15)
Downward: Diffuse reflective surface with diffuse reflectivity > 20% (e.g. walls, trees, people) and adequate lighting (lux > 15)
Aircraft - Video Transmission
Video Transmission System DJI O3 Enterprise Transmission
Live View Quality 720p/30fps, 1080p/30fps (with DJI RC Pro Enterprise)
540p/30fps, 720p/30fps, 1080p/30fps (with DJI FlightHub 2)
Operating Frequency 2.4000-2.4835 GHz
5.150-5.250 GHz (CE: 5.170-5.250 GHz)
5.725-5.850 GHz

In some countries and regions, the 5.1GHz and 5.8GHz frequency bands are prohibited, or the 5.1GHz frequency band is only allowed for indoor use. Please refer to local laws and regulations for more information.
Max Transmission Distance (unobstructed, free of interference) DJI Matrice 3D
FCC: 15 km
CE: 8 km
SRRC: 8 km
MIC: 8 km

DJI Matrice 3TD
FCC: 15 km
CE: 8 km
SRRC: 8 km
MIC: 8 km

Measured in an unobstructed outdoor environment free of interference. The above data shows the farthest communication range for one-way, non-return flights under each standard. Always pay attention to RTH reminders in DJI FlightHub 2 during your flight.
Max Transmission Distance (unobstructed, with interference) ‌Strong Interference (dense buildings, residential areas, etc.): 1.5-3 km (FCC/CE/SRRC/MIC)
Medium Interference (suburban areas, city parks, etc.): 3-9 km (FCC), 3-6 km (CE/SRRC/MIC)
Low Interference (open spaces, remote areas, etc.): 9-15 km (FCC), 6-8 km (CE/SRRC/MIC)

Measured with the aircraft flying (without third-party payloads) in unobstructed environments with typical interference. The above data shows the farthest communication range for one-way, non-return flights under each standard. Always pay attention to RTH reminders in DJI FlightHub 2 during your flight.
Max Download Speed 5 MB/s (with DJI Dock 2)
‌15 MB/s (with DJI RC Pro Enterprise)

Measured in a laboratory environment with little interference in countries/regions that support both 2.4 GHz and 5.8 GHz. Download speeds may vary depending on the actual conditions.
Lowest Latency The video transmission latency from the aircraft to the dock is approximately 110 to 150 milliseconds (affected by the actual environmental conditions).
The video transmission latency from the dock to DJI FlightHub 2 is affected by the actual network conditions and the computer's configuration.
Antenna 4 antennas, 2T4R
Transmitter Power (EIRP) 2.4 GHz: < 33 dBm (FCC), < 20 dBm (CE/SRRC/MIC)
5.1 GHz: < 23 dBm (CE)
5.8 GHz: < 33 dBm (FCC/SRRC), < 14 dBm (CE)
Aircraft - Storage
Supported Memory Cards ‌Aircraft:
U3/Class10/V30 or above is supported. A list of recommended microSD cards can be found below.
Recommended microSD Cards ‌Aircraft:
SanDisk Extreme 32GB V30 A1 microSDHC
SanDisk Extreme PRO 32GB V30 A1 microSDHC
SanDisk Extreme 512GB V30 A2 microSDXC
Lexar 1066x 64GB V30 A2 microSDXC
Kingston Canvas Go! Plus 64GB V30 A2 microSDXC
Kingston Canvas React Plus 64GB V90 A1 microSDXC
Kingston Canvas Go! Plus 128GB V30 A2 microSDXC
Kingston Canvas React Plus 128GB V90 A1 microSDXC
Kingston Canvas React Plus 256GB V90 A2 microSDXC
Samsung PRO Plus 256GB V30 A2 microSDXC
Aircraft - Battery
Capacity 7811 mAh
Voltage 14.76 V
Max Charging Voltage 17.0 V
Type Li-ion 4S
Chemical System LiNiMnCoO2
Energy 115.2 Wh
Weight 544 g
Cycle Count 400
Charging Temperature 5° to 45° C (41° to 113° F)
‌Aircraft - Power Adapter
Input 100-240 V (AC), 50/60 Hz, 2.5 A
Output Power 100 W
Output ‌Max output power of 100 W (total)

When both ports are used, the power adapter will dynamically allocate the output power of the two ports according to the load power, and the maximum output power of one of the ports is 82 W.
Aircraft - Charging Base
Input USB-C: 5-20 V, 5.0 A
Output Battery Port: 12-17 V, 8.0 A
Rated Power 100 W
Charging Type One battery charged at a time
Charging Temperature 5° to 40° C (41° to 104° F)

 

  • 1x Dock Body
  • 1x Wind Speed Gauge Module
  • 4x Expansion Bolts
  • 1x Ethernet Cable Connector
  • 1x Power Cable Connector
  • 6x Wire Ferrules
  • Screws and Tools
  • 1x DJI Matrice 3TD drone
  • DJI Care Enterprise Plus for DJI Matrice 3TD

Top customer reviews

No reviews

Write Your Own Review
You're reviewing:DJI Dock 2 + Matrice 3TD with DJI Care Enterprise Plus
Your Rating