{"title":"Shop \/ Drones \u0026 Parts \/ Indoor Drones","description":"\u003ch2\u003eIndoor Drones: UAVs Built to Operate Where GPS Cannot Reach\u003c\/h2\u003e\n\u003cp\u003e\n  The environments that most demand aerial intelligence are often the ones that defeat conventional drones before they\n  leave the ground. Storage tanks, bridge interiors, building voids, tunnels, and tactical structures share a common\n  characteristic — no GPS signal — and that single condition is enough to make most professional UAVs unreliable or\n  uncontrollable. Indoor drones are built around this reality. Instead of depending on satellite positioning, they use\n  onboard sensing systems to build a spatial reference from the physical environment, holding position and navigating\n  obstacles in conditions where standard platforms cannot safely operate.\n\u003c\/p\u003e\n\u003cp\u003e\n  DSLRPros carries two platforms in this category: the Terra Xross 1 from TerraDrone, a Japan-made confined space\n  inspection drone built around LiDAR stabilization and 3D data capture, and the Vantage Robotics Trace, a USA-built\n  nano UAV designed for rapid tactical deployment, encrypted ISR, and covert observation. Both operate without GPS.\n  Beyond that, they serve fundamentally different mission profiles — and selecting between them starts with\n  understanding what each one is actually built to do.\n\u003c\/p\u003e\n\u003ch3\u003eHow Indoor Drones Maintain Stable Flight Without GPS\u003c\/h3\u003e\n\u003cp\u003e\n  Outdoor UAVs use satellite positioning as their primary spatial reference. Take that away and most platforms lose the\n  ability to hold position, execute autonomous routes, or recover from disturbance. Indoor drones solve this by reading\n  the environment directly.\n\u003c\/p\u003e\n\u003cp\u003e\n  LiDAR-based systems scan their surroundings continuously, building a real-time 3D point cloud that the flight\n  controller uses in place of GPS coordinates. Visual position systems use downward-facing cameras and optical flow\n  sensors to track surface patterns beneath the aircraft, maintaining stable hover even in complete darkness when paired\n  with onboard illumination. Both approaches produce controllable, stable flight in enclosed environments — they differ\n  in the density of spatial data they generate, the environments they handle best, and the mission outputs they support.\n\u003c\/p\u003e\n\u003ch3\u003eIndoor Drones Available at DSLRPros\u003c\/h3\u003e\n\u003ch4\u003e\u003cstrong\u003eTerra Xross 1 — TerraDrone\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\n  The Terra Xross 1 is a purpose-built industrial inspection drone designed to operate in the confined, GPS-denied\n  environments that inspection professionals most need to access and least want to send personnel into. Built in Japan\n  by TerraDrone and distributed through UAS VoSS, it uses a Class 1 LiDAR system as its primary stabilization reference,\n  scanning at 200,000 points per second and 10 Hz to hold position against walls, ceilings, and structural elements\n  without any satellite input. A supplementary visual odometry sensor adds a second stabilization layer for changing\n  conditions.\n\u003c\/p\u003e\n\u003cp\u003e\n  The aircraft carries a fixed 4K camera with 180° tilt, dual LED arrays producing 10,480 lumens maximum for imaging in\n  complete darkness, and a full-surround protective cage that absorbs contact with surfaces during close-quarters\n  flight. The same LiDAR system that stabilizes the aircraft also generates the inspection data — real-time 3D point\n  cloud output that Terra Xross Cloud links directly to captured still images and video, giving inspection teams a\n  spatially indexed record of every finding rather than an unorganized image library. Tethering to an external power\n  pack is supported for operations requiring flight duration beyond the 10-minute battery-only limit.\n\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWeight: 1,800 g (3.97 lb) including battery\u003c\/li\u003e\n  \u003cli\u003eSize: 36 cm × 31 cm × 21 cm (14.2 in × 12.2 in × 8.3 in)\u003c\/li\u003e\n  \u003cli\u003eFlight time: 10 minutes battery-only; tethered power option available\u003c\/li\u003e\n  \u003cli\u003eMax speed: 2.5 m\/s (8.2 ft\/s)\u003c\/li\u003e\n  \u003cli\u003eWind resistance: 3 m\/s (9.8 ft\/s)\u003c\/li\u003e\n  \u003cli\u003eOperating temperature: 0°C–45°C (32°F–113°F)\u003c\/li\u003e\n  \u003cli\u003e\n    LiDAR: Class 1; 200,000 points\/sec; 10 Hz; range 40 m (131 ft) @ 10% reflectivity \/ 70 m (230 ft) @ 80%\n    reflectivity; 2 cm precision @ 10 m\n  \u003c\/li\u003e\n  \u003cli\u003eCamera: 1\/1.7-inch 8MP; 4K (3840×2160); 180° tilt; auto mode\u003c\/li\u003e\n  \u003cli\u003eLighting: 10,480 lumen maximum; dual integrated LED arrays\u003c\/li\u003e\n  \u003cli\u003eCommunication: 2.4 GHz ISM; Terra Xross Range Extender available for signal-obstructed environments\u003c\/li\u003e\n  \u003cli\u003e\n    Cloud platform: Terra Xross Cloud — links images and video to 3D LiDAR data; first year of Basic 500GB included\n  \u003c\/li\u003e\n  \u003cli\u003e\n    Accessories carried: spare battery, battery charger, motor set (4 pcs), propellers (1 set), replacement cage, Terra\n    Xross Range Extender, Terra Xross Cloud Basic 500GB (after first year), Terra Xross Cloud Additional Storage (500GB)\n  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eVantage Robotics Trace — Public Safety Bundle\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\n  The Vantage Robotics Trace is a nano UAV designed for field operators who need aerial intelligence without the size,\n  weight, or setup time of conventional platforms. Designed, sourced, and built in the USA, it weighs 153 g, folds into\n  an IP67 field case that fits in a backpack alongside two batteries and the Vision2 GCS — total system weight under\n  1,000 g — and deploys by hand in 30 seconds. It is NDAA compliant with DoD Blue UAS pending, and carries AES-256\n  encryption across all communications and data storage with no remote data transmission.\n\u003c\/p\u003e\n\u003cp\u003e\n  The 2-axis stabilized Wisp EO\/IR gimbal carries a 48MP electro-optical camera with an f\/1.8 autofocus lens and 25×\n  digital zoom, alongside a 320×240 uncooled VOx IR thermal sensor. Visual position control and an integrated scene\n  illuminator maintain stable flight in GPS-denied environments without LiDAR. Obstacle avoidance keeps the aircraft\n  clear of surfaces in confined spaces and structures. At under 37 dBA at 25 m and not visible at 30 ft against terrain,\n  it operates without announcing its presence — a characteristic that matters in tactical and public safety deployments\n  where covert observation is a mission requirement.\n\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAirframe weight: 153 g takeoff weight\u003c\/li\u003e\n  \u003cli\u003eSystem weight: under 1,000 g with field case, 2 batteries, and Vision2 GCS\u003c\/li\u003e\n  \u003cli\u003eFlight time: 36 minutes\u003c\/li\u003e\n  \u003cli\u003eTop speed: 52 kph (32 mph)\u003c\/li\u003e\n  \u003cli\u003eWind resistance: up to 25 knots\u003c\/li\u003e\n  \u003cli\u003eOperating temperature: -20°C–45°C (-4°F–113°F)\u003c\/li\u003e\n  \u003cli\u003eIngress protection: IP53 (aircraft); IP67 (field case)\u003c\/li\u003e\n  \u003cli\u003eAcoustic signature: under 37 dBA at 25 m\u003c\/li\u003e\n  \u003cli\u003eLOS range: 6 km; NLOS range: 500 m (30 dBi attenuation)\u003c\/li\u003e\n  \u003cli\u003e\n    EO camera: 48MP; f\/1.8 autofocus; 25× digital zoom (67°–2.7° HFOV); 8,000 × 6,000 px stills; 1080p or 4K MPEG-4\n  \u003c\/li\u003e\n  \u003cli\u003eThermal sensor: 320×240 uncooled VOx IR; 24° or 57° HFOV\u003c\/li\u003e\n  \u003cli\u003eGimbal: 2-axis stabilized; pitch -90° to +70°\u003c\/li\u003e\n  \u003cli\u003eSecurity: AES-256 encryption; no remote data transmission; NDAA compliant; DoD Blue UAS pending\u003c\/li\u003e\n  \u003cli\u003eGCS compatibility: QGC, ATAK, WMI, RAC2; MAVLink and RAS-A compliant\u003c\/li\u003e\n  \u003cli\u003eController compatibility: Vantage Vision 2, Kutta KTAC, S20 TE, Tomahawk Mimic or Grip GCS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOperational Applications for Indoor and GPS-Denied UAVs\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n    Confined space inspection: storage tanks, pressure vessels, bridge voids, and enclosed structural cavities where\n    personnel access is restricted or hazardous\n  \u003c\/li\u003e\n  \u003cli\u003e\n    Industrial facility inspection: ductwork, machinery housings, process equipment interiors, and enclosed mechanical\n    systems requiring documented visual data\n  \u003c\/li\u003e\n  \u003cli\u003e\n    Public safety and law enforcement: pre-entry reconnaissance, building clearing support, and indoor situational\n    awareness for tactical teams\n  \u003c\/li\u003e\n  \u003cli\u003e\n    Search and rescue: thermal and EO imaging to locate subjects in smoke-filled, dark, or structurally compromised\n    interiors\n  \u003c\/li\u003e\n  \u003cli\u003e\n    Government and defense ISR: GPS-denied reconnaissance in structures, tunnels, and contested environments requiring\n    NDAA-compliant hardware\n  \u003c\/li\u003e\n  \u003cli\u003e\n    Post-incident documentation: rapid interior assessment following fires, structural incidents, or hazardous material\n    events where direct personnel access is unsafe\n  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSelecting the Right Indoor Drone for Your Mission\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n    Inspection data requirement: if the mission requires 3D spatial data, point cloud output, and indexed inspection\n    records, the Terra Xross 1 is the purpose-matched platform; it generates LiDAR data alongside 4K video and\n    integrates with Terra Xross Cloud for structured team review\n  \u003c\/li\u003e\n  \u003cli\u003e\n    Tactical and ISR requirement: if the mission requires rapid deployment, covert aerial observation, encrypted\n    communications, and combined EO\/thermal imaging in a hand-launched package, the Vantage Trace is the appropriate\n    platform\n  \u003c\/li\u003e\n  \u003cli\u003e\n    Flight duration: Vantage Trace's 36-minute flight time supports extended observation sorties; Terra Xross 1's\n    10-minute battery-only limit suits focused inspection tasks, with tethered power extending operations where access\n    allows\n  \u003c\/li\u003e\n  \u003cli\u003e\n    Compliance mandate: Vantage Trace is NDAA compliant with DoD Blue UAS pending — the correct choice for federal,\n    defense, and public safety procurement programs requiring component-level compliance certification\n  \u003c\/li\u003e\n  \u003cli\u003e\n    Thermal imaging: Vantage Trace carries an integrated 320×240 uncooled VOx IR sensor for passive thermal detection in\n    darkness; Terra Xross 1 does not carry a thermal sensor\n  \u003c\/li\u003e\n  \u003cli\u003e\n    Cold weather operations: Vantage Trace is rated to -20°C (-4°F); Terra Xross 1 is rated to 0°C (32°F) — for winter\n    deployments in cold environments, the Trace has the broader temperature range\n  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\n  DSLRPros carries both the Terra Xross 1 and the Vantage Robotics Trace Public Safety Bundle, along with the full range\n  of Terra Xross 1 accessories, replacement parts, and Terra Xross Cloud subscriptions. Contact our team to discuss\n  which platform fits your operation, or order directly through the DSLRPros store.\n\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat makes indoor drones different from standard professional UAVs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\n  Standard professional UAVs depend on GPS for position hold, autonomous flight, and stability. In enclosed environments\n  — storage tanks, building interiors, tunnels, or any GPS-denied space — satellite signal is unavailable, making most\n  outdoor platforms unstable or uncontrollable. Indoor drones replace GPS with onboard sensing systems: LiDAR mapping,\n  visual odometry, or optical flow sensors that build a spatial reference from the physical environment itself. This\n  allows them to hold position, avoid obstacles, and capture usable data in conditions where conventional platforms\n  cannot safely operate.\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the primary difference between the Terra Xross 1 and the Vantage Robotics Trace?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\n  They are built for different missions. The Terra Xross 1 is a structured inspection platform — it generates real-time\n  3D LiDAR point cloud data alongside 4K video, uses a protective cage for close-proximity surface flight, and\n  integrates with Terra Xross Cloud for spatially indexed inspection records. The Vantage Robotics Trace is a tactical\n  nano UAV — it carries combined 48MP EO and 320×240 thermal IR imaging in a 153 g hand-launched airframe with AES-256\n  encrypted communications, 36-minute flight time, and 6 km LOS range, deployable in 30 seconds from a sub-1 kg field\n  kit.\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich platform is appropriate for government or public safety procurement?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\n  The Vantage Robotics Trace is NDAA compliant with DoD Blue UAS pending, making it the appropriate choice for federal,\n  state, and local agencies with compliance-based procurement requirements. It is designed, sourced, and built in the\n  USA, and features AES-256 encryption on all communications and storage with no remote data transmission. For\n  industrial inspection programs where compliance is not a procurement constraint, the Terra Xross 1 is purpose-matched\n  for confined space inspection and 3D data collection.\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan either platform operate in complete darkness?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\n  Both address low-light operation through different means. The Terra Xross 1 carries dual integrated LED arrays\n  producing up to 10,480 lumens of active illumination for 4K imaging in dark confined spaces. The Vantage Robotics\n  Trace carries a 320×240 uncooled VOx IR thermal sensor for passive detection in darkness without active lighting, and\n  includes a scene illuminator that supports its visual position control system in low-light conditions. For covert\n  operations where active lighting would compromise the mission, the Trace's thermal sensor provides detection\n  capability without announcing the aircraft's presence.\n\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need FAA authorization to fly an indoor drone?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\n  Operations conducted entirely within enclosed structures are generally not subject to FAA airspace regulations, as FAA\n  jurisdiction covers navigable airspace rather than building interiors. However, applicable rules vary depending on\n  aircraft weight, proximity to structures, and local jurisdiction, and operators should verify requirements for their\n  specific deployment. For GPS-denied operations that extend into outdoor or transitional environments, standard FAA\n  rules apply. DSLRPros recommends consulting current FAA guidance and your legal counsel for mission-specific\n  compliance questions.\n\u003c\/p\u003e\n","products":[{"product_id":"terra-xross-1-indoor-inspection-drone","title":"Terra Xross 1 Indoor Inspection Drone","description":"\u003ch2\u003eTerra Xross 1: Japan-Made GNSS-Free Indoor Inspection Drone With LiDAR Stabilization and 4K 180° Tilt Camera\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe Terra Xross 1 is a purpose-built indoor inspection drone designed for the environments that outdoor platforms cannot enter and conventional inspection methods cannot safely navigate. Dark, dusty, confined spaces where GPS is unavailable and stable flight depends entirely on onboard sensing.\u003c\/p\u003e\n\u003cp\u003eDeveloped and manufactured in Japan by Terra Drone Corporation, it achieves automatic position correction through a combination of LiDAR and visual odometry sensors, maintaining stable hover and controlled flight without any GNSS input.\u003c\/p\u003e\n\u003cp\u003eA 4K camera with 180° vertical tilt and integrated LED illumination captures clear footage in low-light conditions, and real-time 3D LiDAR data provides situational awareness for safe BVLOS navigation around obstacles.\u003c\/p\u003e\n\u003cp\u003eEngineered specifically to broaden access to indoor drone inspection capability, it is designed to be within reach of operators and programs that existing indoor platforms have priced out.\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eKey Features and Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGNSS-free stabilization: LiDAR and visual odometry sensors maintain position in dark, dusty, cramped spaces.\u003c\/li\u003e\n\u003cli\u003e4K 180° tilt camera: captures high-resolution footage at any angle with integrated LED illumination.\u003c\/li\u003e\n\u003cli\u003eClass 1 LiDAR: 200,000 points per second at 10 Hz for real-time 3D data and obstacle awareness.\u003c\/li\u003e\n\u003cli\u003e70 m LiDAR range: 40 m at 10% reflectivity; 70 m at 80% reflectivity for varied surface detection.\u003c\/li\u003e\n\u003cli\u003e2 cm range precision: accurate environmental sensing at 10 m for tight confined space navigation.\u003c\/li\u003e\n\u003cli\u003eReal-time 3D view: live point cloud data supports safe BVLOS navigation during indoor flights.\u003c\/li\u003e\n\u003cli\u003eThree batteries included: three 5,200 mAh batteries in the box for back-to-back inspection runs.\u003c\/li\u003e\n\u003cli\u003eTerra Xross Cloud: associates images and video with 3D data for team collaboration and sharing.\u003c\/li\u003e\n\u003cli\u003eComplete system in box: aircraft, controller, tablet, charger, spare props, and accessories included.\u003c\/li\u003e\n\u003cli\u003eMade in Japan: in-house developed and manufactured by Terra Drone Corporation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; margin: 0 auto;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/Xk5VyQhCK3k\" title=\"YouTube video player\" style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%;\"\u003e\n  \u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003eThe Terra Xross 1 ships as a complete, field-ready system: aircraft, controller, three batteries, tablet with holder and cover, charger, spare propellers, battery checker, and a full set of maintenance and connection accessories in the box.\u003c\/p\u003e\n\u003cp\u003eTerra Xross Cloud, launched simultaneously with the aircraft, associates captured images and video with 3D point cloud data for intuitive post-flight visualization, team collaboration, and customer data sharing. \u003c\/p\u003e\n\u003cp\u003eThe LiDAR sensor generates 200,000 points per second at a 10 Hz frame rate with 2 cm range precision at 10 m, supporting both inspection documentation and 3D mapping workflows.\u003c\/p\u003e\n\u003cp\u003eFor inspection programs in oil and gas, mining, utilities, maritime, and industrial facilities where workers currently enter dangerous confined spaces to do visual checks that a drone can perform more safely, the Terra Xross 1 represents a practical and immediate path to removing people from harm.\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eLiDAR Stabilization Built for the Conditions Indoor Inspections Actually Present\u003c\/h3\u003e\n\u003cp\u003eThe Terra Xross 1's position stabilization system addresses a specific failure mode that affects indoor drones relying solely on visual odometry. In dark, dusty, or featureless environments, cameras lose the visual references needed to track position and the aircraft becomes unstable.\u003c\/p\u003e\n\u003cp\u003eThe Terra Xross 1's LiDAR sensor estimates position based on displacement, measuring changes in the physical environment around the aircraft rather than relying on visual contrast, which maintains stable hover and controlled flight even when dust obscures the camera feed or lighting conditions are insufficient for visual tracking.\u003c\/p\u003e\n\u003cp\u003eThe same LiDAR data that stabilizes the aircraft is streamed in real time as a 3D point cloud, giving the operator situational awareness of the surrounding geometry during BVLOS flight.\u003c\/p\u003e\n\u003cp\u003eFor inspection programs in tanks, boilers, chimneys, ship holds, and underground structures where all of these challenging conditions routinely occur simultaneously, this sensing architecture is the difference between a drone that can reliably complete the mission and one that cannot.\u003c\/p\u003e\n\u003ch3\u003eCompatibility and System Integration\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTerra Xross Cloud: cloud-based platform for 3D point cloud and video data management and sharing.\u003c\/li\u003e\n\u003cli\u003eIncluded tablet: pre-connected tablet with holder, cover, and charging cable for controller interface.\u003c\/li\u003e\n\u003cli\u003eController: 536 g dedicated controller with cable for tablet connection; included in box.\u003c\/li\u003e\n\u003cli\u003eThree 5,200 mAh batteries: 18.5V LiPo, 1-hour charge time; all three included in box.\u003c\/li\u003e\n\u003cli\u003eBattery checker: included for pre-flight battery health verification.\u003c\/li\u003e\n\u003cli\u003eSpare propeller set: full four-piece spare set included for field maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"position: relative; width: 100%; padding-bottom: 56.25%; text-align: center;\"\u003e\n  \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/tNx_YxLzC3c?si=joZLFrlgpDFAvove\" title=\"YouTube video player\" style=\"position: absolute; top: 0; left: 50%; transform: translateX(-50%); width: 100%; height: 100%;\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\u003ch3\u003eApplications and Use Cases\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOil and gas plant inspection: stable GNSS-free flight in confined vessels, columns, and elevated structures.\u003c\/li\u003e\n\u003cli\u003eTank and boiler inspection: 4K imagery and LiDAR mapping in enclosed, low-visibility industrial environments.\u003c\/li\u003e\n\u003cli\u003eShip inspection: access confined hull spaces and cargo holds without personnel entry.\u003c\/li\u003e\n\u003cli\u003eChimney inspection: vertical 180° camera tilt captures internal surfaces during ascent and descent.\u003c\/li\u003e\n\u003cli\u003eUnderground mine mapping: real-time 3D LiDAR data supports excavation planning and structural assessment.\u003c\/li\u003e\n\u003cli\u003eDisaster site assessment: navigate collapsed building interiors where human entry is unsafe.\u003c\/li\u003e\n\u003cli\u003eSecurity monitoring: interior surveillance of government and public buildings without physical access.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Terra Xross 1 exists because the two primary barriers to indoor drone adoption, instability without GPS and prohibitive cost, have consistently blocked operators who could benefit from the technology.\u003c\/p\u003e\n\u003cp\u003eBy combining LiDAR-based stabilization with a complete out-of-the-box system, it removes both barriers at once. For inspection programs that have been waiting for an indoor drone that works reliably in the conditions their sites actually present, the Terra Xross 1 is the platform that delivers it.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eDSLRPros has supported professional UAV operators across inspection, public safety, and industrial applications for decades, and the Terra Xross 1 is the indoor inspection platform that fills a capability gap that outdoor drones simply cannot address.\u003c\/p\u003e\n\u003cp\u003eWhen you order the Terra Xross 1 through DSLRPros, you receive the complete system with the product knowledge and deployment support to put it to work in your specific inspection environment from day one.\u003c\/p\u003e\n\u003cp\u003eContact DSLRPros today to discuss your requirements and place your order.\u003c\/p\u003e","brand":"Terra","offers":[{"title":"Default Title","offer_id":47046131450086,"sku":"S-TERRA-XROSS-1","price":23980.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/2769\/8662\/files\/TerraXross1.webp?v=1769859555"},{"product_id":"vantage-robotics-trace-uav-2-4ghz-public-safety-bundle","title":"Vantage Robotics Trace UAV (2.4GHz) Public Safety Bundle","description":"\u003ch2\u003eVantage Robotics Trace UAV (2.4GHz) Public Safety Bundle: Covert Aerial Intelligence in a Pocket-Sized Platform\u003c\/h2\u003e\n\u003cp\u003eThe Vantage Robotics Trace is a military-grade nano UAV built for field operators who need reliable aerial intelligence without the logistical burden of larger systems. Weighing just 153 grams and folding down to fit in a standard cargo pocket, Trace deploys in under 30 seconds and delivers stabilized 48MP electro-optical and 320p infrared imaging from a platform that is unseen and inaudible at 30 feet.\u003c\/p\u003e\n\u003cp\u003eDesigned, sourced, and built in the USA, it carries DoD Blue UAS Cleared and NDAA compliant status — a non-negotiable baseline for public safety and government operations.\u003c\/p\u003e\n\u003ch3\u003eKey Features and Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e48MP EO imaging: 25× digital zoom delivers 2.7° HFOV for precise target identification.\u003c\/li\u003e\n\u003cli\u003eThermal imaging: 320×240 uncooled VOx IR sensor covers a 24° field of view.\u003c\/li\u003e\n\u003cli\u003eFlight endurance: up to 30 minutes operational time on included Standard Batteries.\u003c\/li\u003e\n\u003cli\u003eLOS range: 6 km line-of-sight with AES-256 encrypted, auto channel-hopping link.\u003c\/li\u003e\n\u003cli\u003e360° obstacle avoidance: laser-assisted sensing enables safe indoor and confined-space flight.\u003c\/li\u003e\n\u003cli\u003eGPS-denied ops: visual position control with scene illumination maintains stability indoors.\u003c\/li\u003e\n\u003cli\u003eCovert profile: platform remains unseen and inaudible at 30 feet against terrain.\u003c\/li\u003e\n\u003cli\u003eRapid deployment: foldable airframe deploys from field case in under 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWind tolerance: operational in sustained winds up to 25 knots in the field.\u003c\/li\u003e\n\u003cli\u003eSecure by design: AES-256 encryption, secure boot, and no remote data transmission.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"position: relative; width: 100%; padding-bottom: 56.25%; text-align: center;\"\u003e\u003ciframe style=\"position: absolute; top: 0; left: 50%; transform: translateX(-50%); width: 100%; height: 100%;\" title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/mdraHgFy6Qc?si=BtAxts-EEzEqehNs\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003eWhere conventional small drones compromise on sensor performance or operational security, Trace holds the line on both. The Wisp EO\/IR gimbal provides 2-axis stabilization, 25× digital zoom, and full thermal capability in a package that fits in the palm of a hand.\u003c\/p\u003e\n\u003cp\u003eWith up to 30 minutes of operational flight time on the included Standard Batteries and 6 km line-of-sight range, Trace gives ground teams persistent eyes overhead without requiring a vehicle, a case, or a crew.\u003c\/p\u003e\n\u003ch3\u003eOperational Persistence in a Sub-200-Gram Airframe\u003c\/h3\u003e\n\u003cp\u003eTrace is engineered for missions where size is a liability and compromise is not an option. At 153 grams, it clears the FAA's intrinsically safe weight threshold — meaning operators can deploy it in more environments, around more people, without the risk calculus that applies to heavier platforms.\u003c\/p\u003e\n\u003cp\u003eThe 2-axis stabilized Wisp gimbal holds a clean image through wind and movement, and the autofocus f\/1.8 lens ensures detail is preserved whether the operator is hovering at altitude or threading a narrow corridor. With AES-256 encryption on all communications and storage, and no remote data connect, mission data stays on the network it belongs to.\u003c\/p\u003e\n\u003ch3\u003eCompatibility and System Integration\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVision2 GCS: 7 in, 2,500 nit sunlight-readable display with 4-hour battery life.\u003c\/li\u003e\n\u003cli\u003eVantage Wisp gimbal: 2-axis EO\/IR payload with 320p IR, upgradeable to 640×480.\u003c\/li\u003e\n\u003cli\u003eKutta KTAC and S20 TE: compatible ground control station alternatives for expanded C2.\u003c\/li\u003e\n\u003cli\u003eTomahawk Mimic and Grip GCS: additional compatible controller options for operator flexibility.\u003c\/li\u003e\n\u003cli\u003eATAK integration: supports Android Team Awareness Kit for tactical situational awareness.\u003c\/li\u003e\n\u003cli\u003eQGC, WMI, and RAC2: compatible GCS software platforms for mission management.\u003c\/li\u003e\n\u003cli\u003eMAVLink and RAS-A: compliant communication protocols for interoperability with existing systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications and Use Cases\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePublic safety overwatch: provides persistent aerial awareness for law enforcement operations.\u003c\/li\u003e\n\u003cli\u003eSearch and rescue: thermal and EO sensors locate subjects in low-visibility or night conditions.\u003c\/li\u003e\n\u003cli\u003eTactical reconnaissance: covert profile enables undetected pre-entry intelligence gathering.\u003c\/li\u003e\n\u003cli\u003eIndoor operations: 360° obstacle avoidance supports safe flight in structures and confined spaces.\u003c\/li\u003e\n\u003cli\u003ePerimeter security: perch-and-stare capability sustains observation without continuous flight.\u003c\/li\u003e\n\u003cli\u003eIncident command support: real-time video feeds ATAK and GCS displays for command awareness.\u003c\/li\u003e\n\u003cli\u003eInfrastructure inspection: 25× zoom and 4K video capture detailed imagery of hard-to-reach assets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Vantage Robotics Trace fills a capability gap that no other platform in its weight class reliably closes, persistent, encrypted, stabilized aerial intelligence that an operator can carry in a pocket and deploy alone in under 30 seconds. For public safety teams operating in dynamic, high-stakes environments, Trace is the platform that shows up ready.\u003c\/p\u003e\n\u003cp\u003eDSLRPros has been equipping professional UAV operators for decades and understands what it takes to deploy the right tool on the right mission. When you order the Vantage Robotics Trace Public Safety Bundle through DSLRPros, you get the full system—aircraft, Wisp gimbal, Vision2 GCS, batteries, chargers, propeller guards, field case, and transport case—backed by the product knowledge and support infrastructure that keeps operators in the field.\u003c\/p\u003e\n\u003cp\u003eContact DSLRPros today to configure your Trace bundle or discuss fleet procurement.\u003c\/p\u003e","brand":"Vantage Robotics","offers":[{"title":"Default Title","offer_id":47616373096678,"sku":"S-VAN-TRACE-PS-BUN","price":12599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/2769\/8662\/files\/VantageRoboticsTraceUAV_2.4GHz_PublicSafetyBundle.webp?v=1777688312"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/2769\/8662\/collections\/Terra_Xross_1_2.webp?v=1779517579","url":"https:\/\/www.dslrpros.com\/collections\/indoor-drones.oembed","provider":"DSLRpros","version":"1.0","type":"link"}